About us

Your present location:Products center >> Products >> ERW tube production line

Square to square Way Advantage:

This way is steel strip directly roll and bend into square&rectangle,then weld into finished pipe.  

1) Compare with round into square&rectangle forming way,this way is better for the shape at the edge of cross section,comparatively, semidiameter of inner arcis samll,and the brim is flat,outlook is regular.

2) And the whole line load is low ,especially the sizing parts.

3) The width of steel strip is small about 2.4-3% than round into square & rectangle,it can save the consume of raw material.

4) It adapt the multi-point bending way, avoid the axial force and side abrasion, reduce the forming step while ensure the quality,meanwhile it reduce the power wastage and roller abrasion.

5) It adapt the combined type roller on the most of the stands,it realize that one set of roller can produce dozens of square&rectangle  pipe with different specification,it decrease the store of roller,low the cost about 80% on roller, Fast the bankroll turnover, short the time one new product design.

Message content:
* Entered characters:0 Word
Less than or equal500Character
Your email:
Example: example@mail.com
  Contact me via email
Phone number:
By the number, +, the middle horizontal bar, the composition, the maximum allowed 20 characters
  Contact me via SMS
Verification code: